90° Angle Sidewall Rubber Conveyor Belt

Model NO.: EP200 Material: Rubber Feature: Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant Certificate: ISO9001:2000 ISO9001:2008 Belt Core Material: Nylon, Ep, Cotton Delivery Time: About 2 Weeks After Receive The Deposits Thickness: 3-45mm Max Length/Roll: 800m Trademark: SHUANGJIANG Origin: Yunnan Kunming Type: EP200 Inside Material: Fabric Tensile Strength: Strong Condition: New Load Capacity: Strong Trough Ability Delivery Ways: Sea Shipping or by Air Rubber Grade: 8-25MPa Ply: Multi-Ply, 1-20plies Specification: SGS HS Code: 4010120000
Corrugated Sidewall v rubber Conveyor Belt with ISO Certified
Product Introduction:
Large Angle conveyor belt is made of baseband, guard and diaphragm plate. The flange 
can prevent material sprinkling effectively. Gear edge is designed into corrugated, in order to help material round drum more convenience; And diaphragm plate is used for retainer 
materials. To realize the large angle conveying, the type is T model TC. Gear side and diaphragm plate is connected by secondary cure and baseband , so it has the very high 
bonding strength.
Advantages:
1, increase the conveying Angle (30 ~ 90 degree);
2, cover smaller area, less investment;
3, bigger throughput, higher hoisting height;
4, smooth transition from horizontal to tilt (or vertical);
5, It is suitable for conveying easy sifted the powder, granulated and small lump, paste and liquid the shape material;
6, lower energy consumption, simple structure, higher strength, adhesive tape, longer 
service life;
Specifications:
1.high efficiency 
2.stuff with large obliquities 
3.largest angle is ninety degree 
4.low maintain cost 
5.easy operation
Application:
Applying for large angle transporting, the maximum angle is 90°.
Characteristics:
1. To save time
Because of large angle transporting, thus can be shortened the horizontal length and save the space of laying area.
2.  Strong transporting capacity
Compared with common conveyor belt, with large carrying cross section, has stronger 
transporting capacity than same width conveyor belt.
3.   Without sidewall plate
Because without sidewall plate, thus avoid the local abrasion.
4.       Impossible to use small roller
Impossible to use the traditional size of small roller.
5.       Because the baseband uses special canvas core to improve the canvas, then 
improve the anti-broken ability of belt at the same time.
6.       The sidewall plate and diaphragm are adhesive with baseband through heat 
vulcanization method, thus ensure the bonding strength

Certificate:


 
 


Technical parameters:

 

Specification of the clapboard	Height of the clapboard	Amplitude	Pitch of waves	Width of the motherboard	Square number per meter	Related clapboard	Model of the clapboard	Width of the Clapboard	Square number per meter
S	40	42	41	60	0.45	30	T	30	0.45
S	60	42	41	60	0.85	50	CT	55	0.85
S	80	42	41	60	1.03	75	CT	75	1.03
S	100	42	41	60	1.34	90	CT/T	100	1.36
S	120	42	41	60	1.69	110	CT/T	100	1.70
S	160	60	60/63	80	2.44	T150/140	CT	140	3.2
S	200	60	60/63	80	3.38	180	CT	160	3.5
S	240	70	55	80	4.75	220	CT	170	5.2
S	300	80	75	90	7.03	280/260	CT	170	7.05
S	400	90	80	95	10.8	360	CT	180	14.5

Conveyor belt with thernalvucanization combined rib and variety of physical properties indicators:

Serial NO	Inspection item	Counting unit	Standard	Actual inspction result
1	Covering rubber longitudinal strength	Mpa	>=18	21.2
2	Covering plastic tensile elongation	%	>=400	463
3	Coverage of plastic wear	cm3/1.61km	<=.08	0.52
4	Covering compound hardness(Shore A)	DU	55-65	63
5	Cotton canvas inlay adhesion strength	kn/m	3.20	5.2
6	Covering rubber and cloth level strength	kn/m	2.70	4.3

F.A.Q 

1. Can you provide free samples, how long does it need?

   Yes, We can provide free samples but the freight fee need to pay by customer, normally the samples can be shipped the day you ask, but for some special type, we may need 3 days to prepare before shipment. 

2.  What's the L/T for orders?

     Normally the L/T is 2 weeks after receiving deposit, but if customers need urgently, we can also try our best to expedite as soon as possible.

3.  How do you control quality?

      We have get the ISO9001:2008 and SGS certification, moreover, we have strict quality control in IQC, inprocess quality control and FQC as well.

4.  How long is the warranty?

       our warranty is various from 3-12 months based on different products

5. Why choose us?
1) Fast response
2) High quality, more than 17 experience in rubber conveyor belt area.
3) Factory direct price
4) Strict quality control in IQC, production and FQC
5) Good pre-sale, sale and after-sale service
6) Short lead time
7) Product with long life time
8) Brand with reputation in Kunming city


You are always welcome to visit our factory.

If anything need, pls do not hesitate to contact us.
 
 

Contact us if you need more details on Rubber Conveyor Belt. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Conveyor Belt、Belt Conveyor. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Large Angle/Corrugated Sidewall Conveyor Belt