Agriculture Conveying Gravel System Rubber Conveyor Belt
Basic Info
Model No.: Agriculture Conveying Gravel System Rubber Convey
Product Description
NN Carcass | EP Carcass | |
Similarity | Lower longitudinal elongation; Higher tensile strength; Good flexibility and troughability; Good resistance to mildew, moisture and rotting; Excellent impact resistance; | |
Difference | Woven by nylon both in warp and weft | Woven by polyester in warp and nylon in weft |
Conveyor belt Market |
Aggregate,Baggage Handling,Bulk Handing, Cement,Coal, Foundry, Grain, Hard Rock, Package Handling,Wood Products, Sand and Gravel, Steel Products. | |
Conveyor Belt Tensile strength | 80~3000N/mm | |
Width | 300mm-2500mm | |
Conveyor Belt Features | 1,Reduced strength ; 2.High-modules, superior troughing characteristics; 3,Variety of cover compounds and cover gauges. |
Cover position intensity Mpa is not smaller than | 10 |
The overburden layer abruption elongation ratio % is not smaller than | 350 |
Uses 100% to gather the nylon canvas to make the belt core general difficult to burn the belt, the level the bonding strength conforms to the following standard
Target project | Cloth level | Overburden layer and cloth level | |
Overburden layer thickness≤1.5mm | Overburden layer thickness>1.5mm | ||
The complete test specimen mean value is not smaller than,N/mm | 5.0 | 3.5 | 3.9 |
The complete test specimen lowest peak value is not smaller than,N/mm | 3.9 | 2.4 | 2.9 |
Uses the cotton fibre canvas to make the belt core general difficult to burn the belt, the level the bonding strength should conform to the following standard
Target project | Cloth level | Overburden layer and cloth level | |
Overburden layer thickness≤1.5mm | Overburden layer thickness>1.5mm | ||
The longitudinal model mean value is not smaller than,N/mm | 2.7 | 2.4 | 2.7 |
The longitudinal model lowest peak value is not smaller than,N/mm | 2.0 | 1.6 | 2.0 |
Uses other textile fiber canvas to make the belt core general difficult to burn the belt, the level the bonding strength should conform to the subscript
Target project | Cloth level | Overburden layer and cloth level | |
Overburden layer thickness≤1.5mm | Overburden layer thickness>1.5mm | ||
The complete test specimen mean value is not smaller than,N/mm | 3.5 | 2.4 | 3.0 |
The complete test specimen lowest peak value is not smaller than,N/mm | 2.7 | 1.6 | 2.2 |
Overburden layer physical property
Flame retardancy energyJ | Difficult to burn and to lead the static electricity performancek |
Three longitudinal entire thickness test specimen's flame duration's mean value is not bigger than | The flame retardancy can lead the static electricity performance surface request with J not to be bigger than 3×108Ω |
and 60S any single result does not have the afterburning phenomenon |
Type | Rubber Cover Type | Tensile strength at break(N/mm2) | Elongation at break % | Abrasion mm3 |
Abrasion Resistant | RCB-AR-M | 24 | 450 | 120 |
RCB-AR-Y | 20 | 400 | 150 | |
RCB-AR-W | 18 | 400 | 90 | |
RCB-AR-N18 | 18 | 450 | 200 | |
RCB-AR-N | 17 | 400 | 200 | |
RCB-AR-A | 17 | 400 | 70 | |
RCB-AR-Z | 15 | 400 | 250 | |
RCB-AR-II | 14 | 350 | 280 | |
RCB-AR-L | 10 | 350 | 300 | |
Oil Resistant | RCB-FOR | 12 | 300 | 300 |
RCB-MOR | 15 | 450 | 250 | |
RCB-LOR | 17 | 450 | 200 | |
Heat Resistant | RCB-HR-T1-100oC | 17 | 400 | 250 |
RCB-HR-T2-125oC | 15 | 350 | 250 | |
RCB-HR-T3-150oC | 13 | 350 | 250 | |
RCB-HR-T4-180oC | 11 | 350 | 280 | |
RCB-HR-T5-300oC | 10 | 350 | 300 | |
FR/AR/AS Resistant | RCB-ARAS | 18 | 450 | 200 |
RCB-FRAS | 14 | 400 | 250 | |
RCB-FR | 12 | 350 | 300 | |
Cold Resistant | RCB-CR-T1-- -30oC | 17 | 350 | 300 |
RCB-CR-T2-- -50oC | 14 | 300 | 300 | |
Chemicl Resistant | RCB-ANTI-ACID | 14 | 400 | 250 |
RCB-ANTI-ALKALI | 14 | 400 | 250 |
Product Categories : Heat/ Oil/Fire Resistant Conveyor Belt
Premium Related Products