12 MPa    1200mm Ep/Polyester Abrasion Resistant Conveyor Belt   

Model NO.: 12mpa 1200mm EP/polyester abrasion resistant belt Material: Rubber Feature: Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant The Max. Width of Belt: 3, 200 mm Transport Package: Roll Origin: Weifang, Shandong, China Type: Cc;Ep;Nn Inside Material: Fabric Tensile Strength: Strong Trademark: YM Specification: good quality HS Code: 40101200 12mpa 1200mm EP/polyester abrasion resistant Conveyor Belt   Features of EP/polyester abrasion resistant conveyor belt: 1.thin belt body,high strength
2.soft and has good flexibility,easier to form trough
3.good impact resistance,abrasion resistance,corrosion resistance
4.suitable for moderately long distances and high load transportation under high-speed conditions.   Usage of EP/polyester abrasion resistant conveyor belt:   Polyester/EP abrasion resistant conveyor belt is suitable for conveying a variety of non-corrosive,no spikes massive,granular,powder materials under room temperature,such as coal,gravel,grain,sand,slag,ore,cement and other bulk materials or packaged items.    - Industry
Cement plants,
Steel plants,Aluminium plants,
Chemical plants,
Fertilizer plants,
Glass industry,
Food-products plants,
Sugar plants,
Coal fired power plants,
Miscelaneous industries - Mines and quarries
Iron ore, copper ore, nickel ore, manganese ore, chromium ore, gold ore,
Coal,
Bauxite,
Phosphate rock,
Potash rock,
Limestone, clay, gypsum,
Aggregates,
Salt, lithium nodules - Civil works
Tunnel construction for rails, roads or for Belt Conveyor installation,
Construction of dams and embankments,
Construction of reservoirs,
Construction of harbour platforms or airport platforms,
Earth removal for car-parks, stadium construction - Terminal operators
Vessel loading terminals,
Storage yards before dispatch,
Barge loading terminals,
Storage terminals after unloading General Specs of EP/polyester abrasion resistant conveyor belt:
(1)Fabric of belt carcass:EP100,EP150,EP200,EP250,EP300,EP350,EP400,EP450,EP500
(2)width of belt:300mm-1600mm
(3)number of fabric layers:2-10ply
(4)thickness of covering glue:top working side:0-10mm,bottom non-working side:0-6mm   Polyester abrasion resistant conveyor belt's technical standards:National standard GB/T7984-2001 Specifications and technical datas of EP abrasion resistant conveyor belt:

carcass  material	fabric type	fabric thickness (mm/ply)	Number of  fabric piles	Strength (N/mm)					Cover rubber thickness (mm)		Belt  width (mm)	Belt  length (m)
				2ply	3ply	4ply	5ply	6ply	upper	bottom
polyester  (EP)	EP100	0.80	2-10	200	300	400	500	600	1.5-8.0	0-4.5	400-2500	≤400
	EP125	0.85		250	325	450	575	700
	EP150	0.90		300	450	600	750	900
	EP200	1.05		400	600	800	1000	1200			500-2500
	EP250	1.25		500	750	1000	1250	1500
	EP300	1.35	2-6	600	900	1200	1500	1800
	EP350	1.50		-	1050	1400	1750	2100			600-2500
	EP400	1.80		-	-	1600	2000	2400
	EP500	2.00		-	-	2000	2500	3000

  adhesion and elongation of the belt:

Item		between the fabric layers	between cover and belt carcass
			cover thickness 0.8-1.5mm		cover thickness>1.5mm
average value of all samples,N/mm≥		4.5	3.2		3.5
lowest peak value of all samples,N/mm≥		3.9	2.4		2.9
Remark:highest peak value of all samples shall not exceed 20N/mm

  The cover rubber layer's physical properties: 

grade of cover rubber		Tensile strength,  Mpa,≥	Elongation  at break,% ≥	abrasion loss,  mm3≤	Change rate of tensile strength and  elongation at break after 70ºCx168h aging
laceration resistant type(H)		24	450	120	-25 ~ +25
abrasion resistant type(D)		18	400	100	-25 ~ +25
ordinary type(L)		15	350	200	-25 ~ +25

  We can also produce international standard ep/polyester conveyor belt,such as DIN22102,AS1332,BS490,RMA,JISK6322,SANS1173,etc.  

Standards	Cover Rubber			Adhesion
	Tensile Strength	Elongation at break	Abrasion	Cover to Ply	Cover to Ply	Ply to Ply
DIN 22102	Mpa	%	mm3	N/mm	N/mm	N/mm
				(≤1.5mm)	(>1.5mm)
DIN 22102-Z	15	350	250	3.5	4.5	5
DIN 22102-W	18	400	90	3.5	4.5	5
DIN 22102-Y	20	400	150	3.5	4.5	5
DIN 22102-X	25	450	120	3.5	4.5	5
Standards	Cover Rubber			Adhesion
	Tensile Strength	Elongation at break	Abrasion	Cover to Ply	Cover to Ply	Ply to Ply
AS 1332	Mpa	%	mm3	N/mm	N/mm	N/mm
				(≤1.9mm)	(>1.9mm)
AS 1332-N17	17	400	200	4	4.8	6
AS 1332-M24	24	450	125	4	4.8	6
Standards	Cover Rubber			Adhesion
	Tensile Strength	Elongation at break	Abrasion	Cover to Ply	Cover to Ply	Ply to Ply
RMA	Mpa	%	mm3	N/mm	N/mm	N/mm
				(≤1.6mm)	(>1.6mm)
RMA-I	17	400		3	4.4	4
RMA-II	14	400		3	4.4	4
Standards	Cover Rubber			Adhesion
	Tensile Strength	Elongation at break	Abrasion	Cover to Ply	Cover to Ply	Ply to Ply
SANS 1173	Mpa	%	mm3	N/mm		N/mm
A	18	400	70	5		7
C	20	400	150	5		7
M	25	450	120	5		7
N	17	400	150	5		7

With strong technology strength, advanced production technique and complete inspection equipments, our company manufactures qualified products up to national and international standards. Depending on the strict management system and consummate After-sales service system,we provide our customers with high quality and low price conveyor belts,also a warm service.    ordinary type for general usage solid woven carcass flame retardant type heat/cold resistant type abrasion resistant type oil resistant type chemical resistant type polyester(EP) core type nylon(NN) core type corrugated sidewall type circular/annular type chervon patterned type Samples can be customized according to buyer's requirements and free samples can be sent for evaluations. 





 

Contact us if you need more details on Abrasion Resistant Conveyor Belt   . We are ready to answer your questions on packaging, logistics, certification or any other aspects about 12 MPa Belt、Conveyor Belts for Cement Factory. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Tubular /Endless Belt